Selbyville, Delaware, March 14, 2018 (GLOBE NEWSWIRE) —

Composite Adhesives Market is expected to cross USD 2 billion by 2024; according to a new research report by Global Market Insights, Inc. Increasing application for replacing conventional binding and adhering techniques like mechanical bolt, fasteners and welds in automotive, marine, construction and aerospace industry should impel composite adhesives market size. Its growing popularity for various industrial application can be attributed to significant reduction in structural weight, fuel consumption and cost savings. Use of structural adhesives also shortens production cycle time and eliminate drilling hole on assemblies enhancing its structural strength.

Acrylic composite adhesives demand will witness significant gains at over 5% during forecast period. This growth in demand for acrylic based products can be ascribed to its increasing application scope in binding truck hoods, raised-roof assemblies and in automobiles to bond composites for roofs, doors, liftgates and hoods. Acrylics offer high bond strength on plastics, composites & metals and performs well even on oily surfaces at lower surface temperature than epoxies.  

Request for a sample of this research report @ https://www.gminsights.com/request-sample/detail/2439

Rapid industrial & infrastructural growth along with increasing renovation project incurring huge spending in Brazil, India, Vietnam and China should bolster demand for composite materials thus driving structural adhesives market size. Shifting trends towards adopting composites replacing traditional building materials like brick, wood, mortar and stones should further strengthen industry growth. Composite adhesives are used to bond materials which need to withstand high stresses and loads without compromising structural integrity. 

MMA composite adhesives market size should surpass USD 360 million by 2024 owing to its ardent demand in aerospace industry. Its fairly high tolerance to poor surface condition (such as oil contamination), high strength performance, greater freedom of material choice like metals, magnets, glass, wood and composite along with bondability with dissimilar materials as well as improved finish should drive product demand.

Stringent regulatory framework in U.S. and Europe pertaining to VOC levels, emission control and improved fuel efficiency should substantiate composite adhesives industry growth. European Commission developed CARS 2020 action plan to reinforce automotive industry competitiveness along with addressing climatic, environmental and societal challenges. The plan is built around four major areas of financial innovations, improving market condition, facilitating internationalization and response to technological changes.

Browse key industry insights spread across 450 pages with 960 market data tables & 10 figures & charts from the report, “Composite Adhesives Market Share & Forecast, 2017 – 2024” in detail along with the table of contents:

https://www.gminsights.com/industry-analysis/composite-adhesives-market

Growing demand of composites in manufacturing aircrafts for commercial and defense sectors propels adhesives demand. These products are commonly used to attach joints to cured parts like stingers and uncured parts like wing skins due to its inherent characteristics of offering toughness, strength, stiffness and high temperature performance to fixtures and joints. Focus for existing participant to renovate or buy new models to enhance passenger safety and comfort should also drive product demand.

North America, led by U.S. composite adhesives industry size, is anticipated to grow at a rate of about 4% during projected timeframe. Rising utilization of composite adhesives in medical devices, cascade for engine, leaf spring, machinery and welded tube application should drive industry growth. Growing demand for high-quality composite adhesive which offer superior properties should fuel regional product demand.

One component composite adhesive market size should witness significant gains due to high demand in clean energy sectors. Rise in demand for one-part adhesives can be ascribed to its freedom of application offering high efficiency and lesser time for cure compared to two-part composite adhesives. One-part adhesives are convenient to use as it does not require mixing and can be applied directly to the substrate.

Make an inquiry for purchasing this report @ https://www.gminsights.com/inquiry-before-buying/2439

Composite adhesives industry size from dental application should grow at a rate of over 4% during forecast period. The combination of adhesive composite resin and acid-etched enamel affords the benefits of reducing or eliminating microleakage of the enamel margins along with reducing sensitivity, lowered discoloration of margins, lower rates of recurrent margins and improved retention of restoration.

Cyanoacrylate based composite adhesives will signify robust growth during the projected timeframe due to its instant adhering properties. These grades of adhesives are highly viscous, surface insensitive, low odor and non-blooming in nature. They are self-curing and sets in between 10 to 15 seconds and commonly used to adhere substrates including polypropylene, polyethylene, PTFE and other polyolefins which are difficult to bond. 

Global composite adhesives industry share is fairly consolidated with participants including 3M, Henkel, Permabond, Sika AG, LORD Group, Bostik, SciGRIP and Covestro. Other key industry players include Hybond, Gurit, Huntsman, Argosy, Allnex, Solvay and ASI. Companies manufacturing these adhesives focus to enlarge their production capacity by investing on facility upgradation. They also adopt strategies like merger, acquisition and partnership with other players to enhance their product application portfolio through increasing R&D spending.

Browse Related Reports:

Pressure Sensitive Adhesives Market Forecast, 2017 – 2024

As per region, Asia Pacific holds a major share in the global psa market. Emerging electronics, packaging, food & beverages, and medical industry due to economic development and increasing manufacturing activities will foster the product demand in near future. Pressure Sensitive Adhesives Market size was valued at over USD 7 billion in 2016 and the industry will grow by a CAGR of more than 5.5% up to 2024.

https://www.gminsights.com/industry-analysis/pressure-sensitive-adhesives-market

Polyethylene Wax Market Growth, 2017 – 2024

Polyethylene Wax Market size crossed USD 250 million in 2016 and is estimated to grow at around 3% CAGR to 2024. Asia Pacific led global polyethylene wax market share and accounted for over 30% of the global volume in 2016. The regional growth was mainly driven by positive growth in the industries including automotive, construction, cosmetics and food.

https://www.gminsights.com/industry-analysis/polyethylene-wax-market

About Global Market Insights

Global Market Insights, Inc., headquartered in Delaware, U.S., is a global market research and consulting service provider; offering syndicated and custom research reports along with growth consulting services. Our business intelligence and industry research reports offer clients with penetrative insights and actionable market data specially designed and presented to aid strategic decision making. These exhaustive reports are designed via a proprietary research methodology and are available for key industries such as chemicals, advanced materials, technology, renewable energy and biotechnology.

Contact Us:

Arun Hegde
Corporate Sales, USA
Global Market Insights, Inc.
Phone: 1-302-846-7766
Toll Free: 1-888-689-0688
Email: [email protected]
Web: https://www.gminsights.com
Blog: https://www.gminsights.com/blogs
Connect with us: Facebook | Google+ | LinkedIn | Twitter | News